If you are planning to remodel your kitchen, you’ve always have to confront a problem. You love the gorgeous granite counter-top but the cabinet beneath it appears to be a bit worn or outdated for the moment.
So, a lot of people are looking to replace their kitchen cabinet, but not its countertop, especially if they are with a limited budget. However, can you upgrade cabinetry in the kitchen without changing countertops? What can expert plumbers say?
Yes, there is one good thing to be thankful for. You can upgrade your cabinets in your kitchen without taking away the countertop. You must purchase the modern cabinets from the hardware stores, and then take out the old cabinet from underneath the countertop with care. After that, you can install the cabinet that was older. Additionally, you can use studs to hold the countertop in place while you wait.
Can You Replace Kitchen Cabinets Without Replacing Countertop?
It is possible to change the cabinet in your kitchen without damaging the countertop. Additionally, the procedure is much simpler than people believe. Additionally this DIY kitchen cabinet repair can save you from paying a large amount to professional plumbers and woodworkers.
Be cautious about providing sufficient support to the countertop made of wood or stone before you take off the base cabinets and cabinet frame. Because the countertop is heavy structure, you must give it sufficient support so that it stands in the way of the replacement.
It is recommended to use studs to support the countertop to ensure that it won’t drop from the top and damage the cabinet’s entire installation. We’ll be using 2X4 studs in this case.
How to Remove Kitchen Cabinets Without Removing Countertop?
It is important to fully understand the. You can swap the kitchen cabinet that was old and replace it and replace it with a more modern one without cutting off the countertop. The question is what can you do to remove cabinet without damaging countertop in your kitchen?
Although many plumbers will recommend a variety of things but the best method to go about it is to alter the cabinet. There is no need to worry about the technical aspects of it.
Step 1: Loosening the Cabinet Installation Screws
If you look inside of the cabinet in the kitchen, you’ll see a variety of screws that attach to the cabinet as well as wall behind it. The screws secure the kitchen cabinet in place against walls. The screws must be removed one by one in order to make the cabinet ready to be taken down.
It is necessary to think about two prerequisites to be able to do thisYou must consider two conditions
- What about whether the cabinet was built prior to flooring installation or not? You might not be able remove the cabinet entirely in this situation since it is attached to your flooring in the kitchen.
- Also, think about your toe’s base’s design and built. In some cases the toe base may not come with a separate piece of work. It’s constructed using cabinets directly. If this is the case it is impossible to remove the cabinet without damage to it. It is necessary to remove the cabinet boxes and replace them with brand new ones.
Step 2: Cutting the Plumbing Area Sides
Most of the time the back side of the cabinet is joined to the plumbing. It could cause you to have difficult time in getting the cabinetry off its countertop underneath. It is essential to ensure that you don’t harm the plumbing setup in the process.
You could employ a salzsaw or saber saw to accomplish the task. Make use of the saw you feel at ease with for the best results. After you have found the most preferred saw, you can utilize it to trim the plumbing in the kitchen near the cabinet.
When cutting around the plumbing area ensure that the cuts are big enough. They must fit the cabinet to allow it to slide over that kitchen sink. Don’t be rushed to cut the corners otherwise you risk damage to the plumbing installation.
Alternative cutting techniques:
A lot of people have found the use of salzsaw or the sabersaw difficult. So, it is worth employing a different but efficient cutting method. It can be used to separate the back on the cabinets in the kitchen to separate it from the plumbing spaces that surround it.
It is recommended to tap the walls of the cabinet with maximum forces in order to remove them of the place where you install them. After you have knocked out the rear of the cabinet attempt to remove these walls in one at a time. Be cautious not to damage the plumbing installation.
Step 3: Using the Studs for Countertop Support
We’ve mentioned before that kitchen countertops including stones and granite countertops are heavy. Therefore, they lack proper support, and it could be able to fall from the top and cause damage to the cabinet’s entire installation.
We are using 2″X4″ Studs to accomplish this. Additionally, the studs must be strong enough to support the weighty countertop. If you are removing one of the sides of the cabinet place the stud on top, to hold the countertop correctly. Use the same stud mounting method for the other sides to ensure the countertop remains in good order.
Step 4: Inspecting the Cabinet Walls
Since the wall of the cabinet is situated near pipes, usually these walls are damp. This triggers the development of mildew and mold. It could be harmful to the kitchen cabinet as well as its walls. Additionally, the growth of mold is not good for your health.
So, take note of the cabinet’s walls as well as the pipe system. If you spot any signs of mold growth, employ a commercial mold killer to eliminate the mildews and mold. Additionally, you should use dampen removal products on the walls to ensure that they stay dry. This will prevent the walls from becoming damp in the near future.
In the event that mold has grown too extensive and the walls have been damaged Consider seeking advice from a professional contractor. Also, look over the plumbing and check whether there are any leaks. If you have found leaks, you can use Teflon tape to seal them up accurately.
Step 5: Install the New Cabinet
When you’re sure that the walls haven’t been squeaked any more, you are able to mount your new cabinet. You must push the walls of the cabinet against the sides that you cut in the past close to the plumbing locations. After the cabinet has been placed in a safe manner, you can take off the studs that support the countertop.
After that, you can tighten them one at a time one, and lastly, examine if there’s a space in the plumbing. It is important to fill it up with the proper substance, like concrete or Teflon to ensure durability.
Can You Replace Countertops Without Damaging Cabinets?
The majority of kitchen remodeling projects involve cabinet removal, there are some who are looking to replace their countertops as well. The good thing is that it is possible to replace countertops made of stone or granite easily , without harming cabinets.
If the countertop is stained or begins to wear away then you must consider replacing it with a brand new one. But, you must be extremely careful when removing any granite countertops because it is heavy and sturdy. We suggest calling professionals to finish the task. It could be expensive, but you’ll avoid ruining your cabinet and injuring yourself.
Conclusion
What if you could install kitchen cabinets, without having to replace countertops? In general, it’s an easy and simple process to take out the kitchen cabinet using countertops with studs to support them. The most important thing is to remain in a state of mind and move in a step-by-step manner with care and prudence. If you follow our tips regarding the removal of kitchen cabinets process, you’ll discover it is easier than you thought of it.